Follow the line (hand as steady as possible) until the paint starts to break (not cover fully). Slowly move the brush up to the edge in a semi-circular motion. Start an inch or two away from the edge with the brush parallel. To cut in, use a 4-inch brush fully loaded with paint. ‘Cutting in’ is the art of painting a straight line, on a ceiling or wall to separate two colours with just a paintbrush. The first coat acts as a base.īe more accurate when you do the second coat to get the perfect finish. When cutting in with the first coat, you don't need to be really precise with your lines. Alternatively, use a block brush or a 4-inch emulsion brush to get into all the ceiling crevices. This is typically a multi-slit, foam roller that provides complete coverage. To paint a simple textured or artexed ceiling you can use a specialist segmented foam roller. What is the best paint brush and best paint roller for these kinds of ceilings? Generally, you'll need a 2-4 inch brush to cut in and a 9-inch roller to apply the paint. Application What is the Best Way of Painting a Ceilingĭifferent ceilings require different application methods.Ī smooth, previously painted ceiling is pretty straightforward. This will help create a smoother surface, making it easier to paint straight lines. Tape doesn’t help, so get a small paint scraper (1-2 inches), hold at a 45° angle on the edge of the ceiling and run along the length of the ceiling. It is difficult to paint the edges of a textured ceiling. You can use a clean broom here so you don’t have to get up a ladder. Get a stiff brush and brush the ceiling to get rid of any debris and dirt. To be safe, switch off the electricity supply while painting if you can. Repeat the process to double the width of the tape and cover more of the fitting. If you have a simple ceiling rose pendant fitting, unscrew the fitting, slide down and cover.Īlternatively, use painters tape or masking tape around the edges of the light fitting nearest to the ceiling. This will create a barrier to stop any watermarks/stains seeping through and spoiling your ceiling finish. If you are already using an oil-based undercoat or gloss, use this instead. Use specialist stain blocker beforehand to cover these. Water-based emulsion paint won't cover watermarks or stains properly. Use a damp cloth or sponge to wash the ceiling to get rid of any dust from the sanding process. This gives a smoother finish and a more adhesive surface for the paint. If there are any holes or hairline cracks fill with a suitable filler product and rub down when dry. If the paint is uneven or peeling give it a rub down with sandpaper – you can use a sanding pole for speed. A kitchen scrubbing pad is good for this. If the ceiling is dirty, something that often occurs in a kitchen for example, first wash the ceiling with sugar soap to clean and degrease. If the ceiling is smooth and only has a few coats of paint, it just needs a brush over to get rid of any debris, cobwebs and dust. When working overhead, protective gear such as overalls, goggles and a baseball cap are good idea to keep dust created by sanding and spray from your paint roller off your clothes and hair, and out of your eyes.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |